D30
•Rotation angle min 2.5° max 100°
•Stroke From 5 mm (0.2¨)
•Input signal 4-20 mA DC
•Air supply 1.4-8 bar (20-115 psi) Free from oil, water and moisture.
•Air delivery 45.6 Nm3/h at 6 bar (29,3 scfm @ 87 psi
•Air consumption 0.5 Nm3/h at 6 bar (0,31 scfm @ 87 psi)
•Air connections ¼” G or NPT
•Cable entry 2x M20x1.5 or ½” NPT
•Electrical connections Screw terminals 2.5 mm2 /AWG14
•Linearity <0.4%
•Repeatability <0.5%
•Hysteresis <0.3%
•Dead band 0.1-10% adjustable
•Display Graphic, view area 15 x 41 mm (0,6 x1,6 ”)
•UI 5 push buttons
•CE directives 93/68EEC, 89/336/EEC, 92 /31/EEC
•Voltage drop, w/o HART 8 V
•Voltage drop, with HART 9.4 V
•Vibrations < 0.25% FS 10-500 Hz 2g max
•Enclosure IP66
•Material Die-cast Aluminum
•Surface treatment Powder epoxy
•Temperature range -40˚F to 176˚F
•Weight 4 lbs
•Mounting position Any Communication protocols: Hart Profibus PA Foundation Fieldbus
D3
•Rotation angle Min. 30° max. 100°, optional 270°
•Stroke 5–130 mm (0.2″ to 5.1″)
•Input signal 4–20 mA
•Air supply 2–7 bar (30–105 Psi) Free from oil, water & moisture, filtered to min. 30 micron.
•Air delivery 350 nl/min (12 scfm)
•Air consumption <0.3 nl/min (0.01 scfm)
•Air connections 1/4″ G or NPT
•Cable entry 3 x M20 x 1.5 or 1/2″ NPT
•Electrical connections Screw terminals 2.5 mm²/AWG14
•Linearity <1%
•Repeatability <0.5%
•Hysteresis <0.4%
•Dead band 0,2–10% adjustable
•Display Graphic, view area 15 x 41 mm (0.6 x 1.6”)
•UI 5 push buttons
•Processor 16 bit, M 16C
•CE directives 93/68EEC, 89/336/EEC, 92/31/EEC
•EMC EN 50 081–2, EN 50 082–2
•Voltage drop 8 V (400 Ohm) non-Hart, 9,4 V (470) Ohm Hart
•Vibrations <1% up to 10g at frequency 10–500 Hz
•Enclosure IP66/ NEMA 4X
•Material Die–cast aluminium, A2/A4 fasteners
•Surface treatment Powder epoxy
•Temperature range –22°F to +176°F
•Weight D3X, 3 lbs – D3E, 6.6 lbs Communication protocols: Hart Profibus PA Foundation Fieldbus
EP5
Deadband < 0.15%
Input signal 4–20 mA
Linearity < 1%*
Hysteresis < 0.75%*
Repeatability < 0.5%*
Air supply Max. 1 MPa/150 Psi, Oil, water and dustfree (min 0,14 Mpa/21 psi)
Air consumtion 0.6 MPa/87 Psi; 22 nl/min (0.78 SCFM) High Perf.version
9.9 nl/min (0.35 SCFM) Normal version
Connector threads 1/4″ NPT or G (BSP)
Gauge threads 1/8″ NPT or G (BSP)
Counduit entry 1/2″ NPT or M20
Terminals 2.5 mm² (AWG 14) Screw terminals
Input impedance 170–260 Ohms at 71°F
RFI influence Not measureable
Capacitance Negligible
Position sensivity None
Supply pressure effect 0.5%/0.1 MPa (15 Psi)
Temperature range –4°F to +185°F
Low temp option –40°F to +185°F
Weight 3.4 lbs
Housing Die cast aluminum
Surface treatment ED Epoxy paint, black
Fasteners A2/A4 Stainless
Ingress protection IP 66/NEMA 4